500kg capacity Welding Positioner for hire

500kg Welding Positioner for hire, in stock

SAFETY GUIDE:Â MAX LOADÂ andÂ TOTAL DISTANCEÂ from the table when tilted 90Â° in the vertical position / based on EVEN balanced weight distributionÂ /Â with no support at the other end

@ 200mm: 400kg

@ 300mm: 350kg

@ 400mm: 300kg

@ 500mm: 250kg

SAFETY GUIDE:Â MAX LOADÂ andÂ TOTAL DISTANCEÂ from the table when tilted 90Â° in the vertical position / based on UN-EVEN / ECCENTRIC / OFFSET weight distributionÂ /Â with no support at the other end

@ 200mm: 250kg

@ 300mm: 200kg

@ 400mm: 150kg

@ 500mm: 125kg

See spec sheet: 500kg Welding Positioner

Email about this machine:Â info@spectrumweldingsupplies.co.uk

Product Description

Input Voltage: 110V single-phase
Amperage load: 7 amps (16amp yellow plug fitted as standard)
Up / Down limit switches: Fitted
Controls: Fitted to control panel
Foot pedal control: 5mtr cable as standard (left / right twin pedal)
Max welding current: 500A @ 60%
Max load â€“ turntable in the flat horizontal: 500kg (based on no offset loadings)
Tilt range: 135Â° in 50 seconds
Max diameter ‘cylindrical’ job capacity with vertical titled table without hitting front legs:Â 1300mm
Length:Â 1295mm
Width:Â 752mm
Height from floor to top of flat table:Â 861mm
Table diameter:Â 620mm
Distance from floor to centre of table with 90 degree vertical tilted table:Â 743mm
Distance from top of front legs to centre of table with 90 degree tiled vertical table:Â 643mm
Leg height:Â 100mm
Front leg stick out past vertical tilted table: 284mm
Table slots: 4xÂ M16 (subject to model)
Weight: 500kg (exc. 300mm chuck @ 40kg / 500mm light-duty chuck @ 70kg)
PleaseÂ email usÂ for exact dimensions , as some models can vary in size / weight